Ultimate magazine theme for WordPress.

Common Geyser Problems and Easy Fixes (or When to Call a Professional)

You are not alone if you like to start your mornings with a warm, relaxing shower. It is no less than a nightmare when your geyser gives up on you and you have to take a cold water shower. Understanding common geyser problems and knowing a few quick fixes can go a long way.

Clueless about common water geyser problems and how to fix them? Here is a quick guide that will help you understand when you should call a professional, when you can wear the DIYer hat and try to fix the issue by yourself and how A.O. Smith offers the best geyser prices in 2025.

  • Water is not hot enough

This is a common complaint by many homeowners. One of the most common reasons why your water geyser is not providing you with crisp hot water is a faulty thermostat.

Easy Fix: Locate the thermostat and check if the temperature is set too low. Increase the temperature gradually and let your water heater heat up. Do this a couple of times. If your water heater doesn’t give you hot water even after you increase the thermostat temperature, then you might need to replace the thermostat altogether.

When to Call a Professional: A damaged thermostat requires professional help. Get an A.O. Smith extended warranty on top units by A.O. Smith and never again worry about geyser repairs.

  • Geyser is leaking

A leaky geyser is something you should consider addressing immediately, as it can worsen with time. It could be either a case of corrosion or loose connections.

Easy Fix: Inspect the pipes and the fittings attached to your water geyser. Use a wrench to tighten loose fittings, if any.

When to Call a Professional: If your water geyser is old, the leakage can be because the tank is corroded or there is any leakage in the tank itself due to a faulty pressure relief valve. A corroded tank can rarely be repaired, so you will need to call a professional who can replace the geyser for you. Similarly, in the case of a faulty pressure relief valve, you will need to seek professional help.

  • Discoloured water issue

If you are getting rusty or discoloured water from your water geyser, this could be either because of a corroded tank or sediment buildup.

Easy Fix: Turn off the power and water supply and flush your water geyser. You will need to connect a hose to the drain valve at the bottom of the water geyser and flush out all the water until the water runs clear. You can read the user’s manual for step-by-step instructions on how to flush your geyser.

 

When to Call a Professional: A corroded tank can also lead to discoloured water. If that is the case, then you will need to call a plumber to assess the situation and suggest the best action, which typically involves replacing the geyser altogether.

  • Geyser is making a rumbling noise

This is another common geyser issue that homeowners often complain about, especially if their water geyser is old.

Easy Fix: The sediments at the bottom of the geyser can cause rumbling noise when the water is getting heated up. If that is the case, then it can be easily fixed by you. You simply need to flush your geyser as instructed above.

When to Call a Professional: A faulty heating element is another reason why your geyser is making a popping or rumbling sound. So, if flushing the tank doesn’t get rid of the sound, then it is best to call a plumber and tell him to check for any faulty heating element in the geyser.

  • Reduced hot water pressure issue

 

Low hot water pressure can be frustrating. It could again either be a case of sediment buildup or some other plumbing issues.

 

Easy Fix: Before you call a professional for this issue, first flush your tank and clean the shower head.

When to Call a Professional: After flushing the tank and cleaning the shower head, if your water heater is still giving you a reduced water pressure, then it is best to seek professional help. Allow your plumber to inspect the pipes and the entire plumbing system and figure out what needs to be repaired or replaced.

The Bottomline

 

Regular maintenance is the key to increasing the efficiency and lifespan of your water geyser. Always make sure that you switch off the power and the water supply before you try your hand at fixing your geyser at home. If you are sceptical about fixing any geyser issue, it is best to call in the professionals.

Looking for a geyser brand that gives you the best geyser prices in the market without compromising on the quality and the features of the geyser units? Look no further than A.O. Smith water geysers. No matter your budget, size of family and water requirement, they have a water geyser that is a perfect match for your abode. Head over to the A.O. Smith website to get more information on their geyser prices.

Comments are closed.